FAQs

Magnet Driver™ is an accessory for hand and electric screwdrivers that prevents wobbling and dropping screws.

There are different color codes of Magnet Driver™, because each color code is used for the different diameter of hand screwdriver shank or 2” (50mm) powerbit.

· YELLOW for any hand screwdriver or reduced powerbit 1/8” (2-3 mm).

· GREEN for any hand screwdriver or reduced powerbit 3/16” (4,5-5 mm).

· BLUE  for any hand screwdriver or reduced powerbit 15/64” (5,5-6 mm).

· RED  for any hand screwdriver or reduced powerbit 1/4” (6-6,35 mm).

· ORANGE  for any hand screwdriver or hexagonal powerbit 1/4” (6,35 mm).

Yes, you can use Magnet Driver™ with 2” (50mm) powerbits which you have at home. 

No, you can´t. Magnet Driver™ works only with 2” (50 mm) powerbits.

It depends on use of Magnet Driver™. In the test in which 30.000 screws were driven (in wooden material) Magnet Driver™ was still in its perfect shape.

Yes, you can. You can use Magnet Driver™ with any type of screw (PH, PZ, Stare, Hex., SQ, etc.), because Magnet Driver™  is an accessory for the screwdriver shank or powerbit. 

No, you can´t. Magnet Driver™  works only with metal screws.

Magnet Driver™ is made of neodymium magnet, ABS plastic (color code) and flexible TPR rubber.

Please check the instruction once again. Most probably you do not flush Magnet Driver™ with screw.

It is possible that with the first use the rubber is a little bit hard. In case such a problem appears before the first use we advice to drive the hole of Magnet Driver™ with your electric screwdriver a little bit until the rubber will be hotter or put some Vaseline over your powerbit.

Always slide Magnet Driver™ over hand screwdriver or powerbit with a twisting motion.

Magnet Driver™ is a screw holder and it holds screws firmly. It:

· Prevents wobbling or dropping screws.

· Allows countersink and it is surface safe.

· Allows to drive a screw with only one hand and in difficult to reach places.

· Works with hand and electric screwdrivers and most of the bits.

· Works with all types of screw heads: PZ, PH, SQ, TX, etc.

The above mentioned similar products, because of their hard system may damage the surfaces and do not let do countersink.

Magnet Driver™ is created for hobbyists, DIY amateurs, but also for professionals and industries.